Is calibrated pipette accurate?
Is calibrated pipette accurate?
(15) Pipette should be calibrated every three months routinely. (3) Accuracy value must be 99-101 % and C.V. value must be less than 1 %.
Why is calibrating a pipette important?
Pipette calibration is necessary to prevent inaccuracies in order to attain better results, performance, and longevity of the pipette itself.
What is calibration equipment?
Calibration is the process of comparing a reading on one piece of equipment or system, with another piece of equipment that has been calibrated and referenced to a known set of parameters. The equipment used as a reference should itself be directly traceable to equipment that is calibrated according to ISO/IEC 17025.
How often should I calibrate my pipettes?
every 3 to 6 months
The Clinical and Laboratory Standards Institute (CSLI) recommends that pipettes (single and multi-channel) and automated liquid handlers be calibrated every 3 to 6 months. A minimum of two volumes must be tested (nominal and lowest setting) with ten replicates at each volume.
How accurate should pipettes be?
A pipette is accurate to the degree that the volume delivered is equal to the specified volume. A pipette can be consistently inaccurate but this inaccuracy could be very precise, for example if a pipette reads consistently low.
What is the phone number for Artel PCs calibration?
The New Artel PCS Pipette Calibration System. CUSTOMER SERVICE: 888.406.3463.
What is the Artel PCs System?
“The Artel PCS system is a great way for labs to verify pipettes. We verify on a quarterly basis in-house, and if verification fails then we send it out for repairs. Before this, our pipettes would be gone for 1-2 weeks for verification at a 3rd party company that provided the service.
What is an artel Certified Application Specialist?
Certified Artel Application Specialists will set-up, install, and validate your instrument on-site, then train your staff to make best use of it. Artel IQ protocols ensure proper setup, connection, and communication between all components of the system.
What is the best way to calibrate pipettes?
The best way to calibrate pipettes – and the only way to ensure operator competency. The new PCS is a fully integrated system for all of your pipette calibration needs and operator assessments. The complete system allows you to immediately start calibration and includes an instrument, software, label printer, and laptop.
